Technical Specifications

Intended Use: UVB-UVA cross linking, polymer curing, silicon moulding UV emitter in a 3-dimensional enclosed chamber with low pressure UV lamps. Operated in laboratories, prototype silicon moulding making and commercial/industrial curing processes. Solar weather testing use.

Dimensions: 24" by 24" by 24" inner chamber capacity, largest in its category.

Opening: Gas spring operated, manual lift for loading from 3 sides easily

UV Intensity: 25miliWatts/qcm in the 295nm to 410nm range

Reflector: Diffuser-type UV reflecting aluminium.

Lamps: 48 lamps at 40 Watts each.

Opening: Gas spring operated, manual lift for easy loading from 3 sides.

Power Input: 2800 Watt 220-240 VAC, 60 Hz or 50 Hz.

Lamp Life: 1000 hours at continuous run, 800 hours at intermittent run at 25% UV output loss at the lamp end life.

Features:

• Automatic lamp shutdown when lid is opened;
• Timer ON/OFF operation;
• Internal fan forced cooling and internal chamber cooling fan switch;
• Moulded heavy-duty acrylic surface to carry loads up to 200 lbs while curing;
• Lamp maintenance hour totalizer;
• All-metal frame for heavy-duty loading.
  

Regulatory Approvals: Conforms to CSA/NRTL/ANSI standards UL1431 as well manufactured according to ISO 13485 quality controls. Manufactured in Canada by Tanses Technologies Inc.

Caution: Wear eye protection. UV radiation may damage eyes and may cause serious skin burns in a short time. Long-term exposure may result in DNA mutation.